TFT - Q Series

Winstar TFT Q Series is a TFT module Family which are including 3.5 inches, 4.3 inches, 5.7 inches, 7.0 inches, 8.0 inches and 10.2 inches TFT modules.

The modules of Winstar TFT Q Series which are all have integrated a 36-pinout connector on the SSD1963 controller board. The Q Series modules are derivative products from the Winstar existing standard TFT modules which uniform the pin assignment into 36 pins on board. The Q Series modules combined with SSD1963 controller board plus a 36 pin-out connector on board. The Q Series is featured with 8 bit or 16 bit options and already defined pin no. 33 ~ 36 as backlight supply; therefore, the customers no need to design extra backlight circuit. The Winstar TFT Q Series display provides the following innovative advantages to offer outstanding image quality and easily to use:

Key Advantages of TFT Q Series

► All Q Series Modules integrated a 36 pin-out connector on SSD1963 controller board and all connectors are the same direction.
► All Winstar TFT Q Series are both fit for 8 bit and 16 bit parallel interface options.
► The pin no. 33 ~ 36 already be defined as backlight supply.
► Built in backlight driver IC, all Q series TFT displays can be drive by 5.0V (3.5" and 4.3" also support 3.3V). The customers do not have to change the backlight driver circuits while change the TFT module sizes.
► The 5.7", 7.0", 8.0" and 10.2" Q Series are allowed to design "Sleep Mode" to close BIAS(VGH, VGL, AVDD) low power consumption mode.
► Resistive Touch Screen options are available for all Q Series display, and 4-Line signal (X1 ,Y1, X2, Y2) can be input from 36pin connector.
► Capacitive Touch Screen options are available for all Q Series display, and the I2C read/write protocal can be input from 36pin connector.

WF35Q – TFT 3.5 Inches

The WF35Q is Winstar 3.5 inches Q Series item which is an extended model of WF35L with SSD1963 controller board plus a 36 pinout connector. The model is featured with 8 bit or 16 bit option and already defined pin no. 33 ~ 36 as backlight supply, therefore, the customers no need to design extra backlight circuit.

WF43Q – TFT 4.3 Inches

The WF43Q is Winstar 4.3 inches Q series standard item which is an extended item of WF43H. This display is featured with a integrated 36-pinout connector on the SSD1963 controller board. The model is featured with 8 bit or 16 bit option and already defined pin no. 33 ~ 36 as backlight supply, therefore, the customers no need to design extra backlight circuit.

WF57Q – TFT 5.7 Inches

The WF57Q is 5.7 inches size of Winstar TFT Q series family. The WF57Q is the WF57E extended model which is with SSD1963 controller board plus a 36 pin-out connector on board. This model is featured with 8 bit or 16 bit options and already defined pin no. 33 ~ 36 as backlight supply; therefore, the customers no need to design extra backlight circuit. This display is with the module dimension of 141.12 x 101.55 mm. Below is the basic specification of WF57Q as reference.

The 7.0 inches WF70Q is the WF70G extended model which is with SSD1963 controller board plus a 36 pin-out connector on board. This model is featured with 8 bit or 16 bit options and already defined pin no. 33 ~ 36 as backlight supply; therefore, the customers no need to design extra backlight circuit. This display is with the module dimension of 165.0 x 100.0 mm.
Below is the basic specification of WF70Q as reference.

TFT - WF80Q

The 8.0 inches WF80Q is the WF80B extended model which is with SSD1963 controller board plus a 36 pin-out connector on board. This model is featured with 8 bit or 16 bit options and already defined pin no. 33 ~ 36 as backlight supply; therefore, the customers no need to design extra backlight circuit. This display is with the module dimension of 192.8.0 x 116.9 mm. Below is the basic specification of WF80Q as reference.

TFT - WF102Q

The 10.2 inches WF102Q is the WF102A extended model which is with SSD1963 controller board plus a 36 pin-out connector on board. This model is featured with 8 bit or 16 bit options and already defined pin no. 33 ~ 36 as backlight supply; therefore, the customers no need to design extra backlight circuit. This display is with the module dimension of 235.0 x 145.0mm. Below is the basic specification of WF102Q as reference.